Luma Surveillance LUM-500-DVR-16CH, Техническое справочное руководство

Страница: 171 / 217

Luma Recorders
|
Local Interface
Jump to Main TOC 171 Jump to Local Interface
center merely identifies the purpose of the buttons around it; it has
no function.)
At the top right, the Zoom controls let you zoom the camera in or
out, using the + and – buttons to either side.
In the center right, the Focus controls let you adjust the visual feed,
using the + and – buttons to either side. The + button focuses the
lens on objects close to the camera, and the – button makes it focus
on objects that are farther away.
To the bottom right, the Iris controls let you determine how much
light reaches the camera, using the + and – buttons to either side.
This affects both the brightness of the screen and the depth of field.
Below the button grid, the Speed slider determines how rapidly your
camera pans when manually commanded to change its orientation
using the Aim controls. When moving to a preset alignment, the
camera uses top speed.
At the bottom, clicking PTZ sends you to the live page, with a full-
screen view of that channel with the PTZ control panel activated.
Click Back to return to the settings menu, or Live View to return to
the live page.
Motion
This window let you set the parameters of where your camera looks
to detect motion (for example, you can have it detect motion on the
client side of a teller’s window, and not on the teller’s side).
You can set a custom area on each camera for motion detection. At
the top, select a camera and check
Enable Motion Detection .
Choosing an Area (DVR models)
To the left, the camera view shows the area being used for motion
detection. By default, this is the entire screen. You can click and
drag on the screen to create or remove areas from detection. If you
click in a covered area, dragging the mouse removes the selection
area from motion detection. If you click in an uncovered area,
dragging adds to the covered area.
You can click Full Screen and Clear to apply motion detection to the
entire screen, or none, respectively.
Click on the Settings starburst icon to set up a trigger, schedule, and
alert linkage method.