Luma Surveillance LUM-500-DVR-16CH, Техническое справочное руководство

Страница: 199 / 217

Luma Recorders
|
Local Interface
Jump to Main TOC 199 Jump to Local Interface
}
Name: The name of the network.
}
Linking Status: This shows whether or not the connection
succeeded.
}
Type: Typically ethernet.
}
MAC Address: The specific number for this recorder.
}
MTU(B): This gives the maximum size of data packet allowed,
expressed in bytes.
}
NIC Type: This shows your network card type.
}
Traffic: Click this to set the graph to show network activity.
Click Back to return to the settings menu, or Live View to return to
the live page.
Network Detection Tab
This window lets you test your network’s function, as well as view
and adjust its parameters.
Click Back to return to the settings menu, or Live View to return to
the live page.
Network Delay, Packet Loss Test
This checks your network speed and reliability.
Use Select NIC to choose the network you want to test, and enter an
IP address in the Destination Address text box.
Press
Test
to begin. The test is very short, and the results are shown
in a dialog in the center of the window.
Network Packet Export
This performs a test to ensure your recorder can send network
packets accurately. The test sends the packet to a USB storage device
attached to your recorder.
Plug the USB drive into the recorder, then click Refresh . The drive
should show up next to Device Name, with the contents of the drive
displayed in the table below. Click
Export to send the test packet.
At the bottom, click
Status
to update the current data.
Click Network to view a pop-up dialog that allows you to view and
adjust network parameters.
Network Dialog
This lets you set parameters for your network.