Luma Surveillance LUM-500-DVR-16CH, Техническое справочное руководство

Страница: 28 / 217

Luma Recorders
|
FAQ
Jump to Main TOC 28 Jump to FAQ
Alarms and Alerts
Your Luma Surveillance recorder and cameras can be extensively
customized for alarm and alert actions.
How do I set up alarm inputs and outputs?
For full details,
}
for the web interface, see “Alarm Input” on page 105, and
“Alarm Output” on page 106.
}
for the local interface, see “Alarm” on page 156.
System Monitoring and Response
In the web interface, see Configure the Recorder > Alarm Settings .
In the local interface, go to Settings > Configuration > Alarm .
There, for each alarm input, you can name it, choose whether it is
normally open (NO) or normally closed (NC), and choose which
action(s) the recorder takes when the alarm is triggered.
Likewise, for each alarm output, you can set its delay, name it, etc.
Input Wiring
On the 4-channel NVR and 8-channel recorders, the back of the
unit has a set of alarm input connections (labeled with numbers)
and ground connections (labeled G). Each alarm needs to be wired
to a numbered connection and a ground. To insert a wire, press the
orange lock above the connection, insert the wire as far as you can,
and release the orange lock to secure the wire.
For the 16-channel recorders, there are no separate ground
connections; there is a single large grounding post to the right of the
alarm connections. Wrap all grounding wires around this post.
The KB (keyboard) slots are no longer supported by Luma; use the
mouse for the local interface.
Output Wiring
On all units except the 4-channel DVR, the back of the unit has a set
of numbered alarm output connections. To insert a wire, press the
orange lock above the connection, insert the wire as far as you can,
and release the orange lock to secure the wire.