background image

Luma Recorders  

|

  FAQ

Jump to Main TOC 

26 

Jump to FAQ

Am I required to set a time server?

You don’t need to, no. You can use your network time or your 
recorder’s internal clock. However, these can drift over time, so 
we recommend using the NTP server for best accuracy. This is the 
default system setting.

Can I change the recorder to 24-hour time format?

No, but you can adjust the on-screen displays of your analog 
cameras. 

On the web interface, set the OSD under 

Configure the Recorder > 

Camera Settings > Display Settings

On the local interface you set a camera’s OSD under 

Settings> 

Camera Management > OSD

How do I set up a surveillance schedule? 

From the web interface, click on 

Configure the Recorder > Camera 

Settings > Schedule Settings

Click the 

Edit

 button (at the top right of the schedule grid). This 

presents the scheduling window. 

At the top left, you can use the radio buttons to have one activity all 
day (using the drop-down to the right), or to customize a schedule. 
When creating a customized schedule, note the start and stop times 
for each type of activity. Be careful not to leave any dead zones 
where the system is doing nothing.

Once you have the day’s schedule set up, use the controls at the 
bottom to copy it to other weekdays, or use the tabs to create custom 
schedules for them, as well. For more, see “Arming Schedule Tool” 
on page 95.

The local interface works like the web interface, above. Go to 

Settings > Record > Schedule

. For more information, see “Arming 

Schedule Tool” on page 95.

How do I set up a holiday schedule?

If you have no holidays saved yet, you’ll need to create some first. 

 

}

From the web interface, click on 

Configure the Recorder > 

Camera Settings > Holiday Settings

Содержание LUM-500-DVR-16CH


























































































































































































































Отзывы: