Configuring the unit
DSLPipe/CellPipe Quick Setup
3-10
DSLPipe/CellPipe Quick Setup
Displaying ADSL status
To see statistics on the ATM connection, type the following:
lucent% show adsl stats
The following screen of information displays:
ADSL Chipset Version: <Version>
ANSI Version: <Version>
Line Status: Up
Upstream Speed: <Kbps>
VCI
Virtual Circuit Identifier. The default is 35.
input pkts/
input OK pkts
Number of packets received by the unit since the
connection became active. The
input pkts
value
should match the
input OK pkts
value.
output
pkts/output OK
pkts
Number of packets sent by the unit since the connection
became active. The
output pkts
value should match
the
output OK pkts
value.
input cells/
input OK cells
Number of cells received by the unit since the connection
became active. The
input cells
value should match
the
input OK cells
value.
output
cells/output OK
cells
Number of packets sent by the unit since the connection
became active.
The
output cells
value should match the
output
OK cells
value.
f4...rx --
f5...tx
If these numbers increment quickly in a short period of
time, it means that the CO site is sending signals about
problems in the ATM backbone. You may find that the
Internet connection is not stable.
Table 3-2. Fields in the ATM status screen
Fields
Description
