Getting ready to configure
DSLPipe/CellPipe Quick Setup
2-6
DSLPipe/CellPipe Quick Setup
With the exception of parameters designated N/A (not applicable), you can edit all
parameters in any menu. N/A indicates that a parameter does not apply, based on the
value of parameter it is subordinate to; or based on a service not currently available on
your system.
Changing parameters with text entries
To edit text (such as a password), move the cursor to the parameter and press Enter.
An edit field opens, delimited by brackets. A blinking text cursor appears in the
brackets, indicating that you can type in text. If the field already contains text, it is
cleared when you type a character. To modify only a few characters of existing text,
use the arrow keys to position the cursor, then delete or overtype the characters. To
close the edit field and accept the new text, press Enter.
Setting parameters with predefined values
You can change the value of a parameter with predefined values by placing the cursor
beside the parameter and pressing Enter until the correct value appears. To select a
value, move to the next field or exit the menu.
Saving or discarding your changes
When you have finished editing, press the Esc key. If you have entered or changed
any parameters, the Exit menu appears:
EXIT
>0=ESC (Don’t exit)
1=Exit and discard
2=Exit and save
You can save your changes by choosing the Exit and Save option and pressing Enter,
or by pressing 2.
