Configuring the unit
DSLPipe/CellPipe Quick Setup
3-4
DSLPipe/CellPipe Quick Setup
FR Prof = [name of the Frame Relay Profile]
DLCI = [DLCI number for this profile]
Note:
You can set up multiple Frame Relay profiles or use the same Frame Relay
profile in multiple connection profiles.
4
Choose Ethernet > Frame Relay > connection (the “connection” is the FR Prof
name you assigned in the previous step) and assign values to all the parameters in
the menu.
20-501 DSLFrame
Name = DSLFrame
Active = Yes
Call Type = Nailed
FR Type = DTE
Nailed Grp = 1
5
(Optional) You may need to choose Ethernet > Mod Config > Ether Options and
turn Proxy Mode to Off. Check with your service provider.
6
Save all your settings before you exit the DSLPipe main menu.
Creating a connection profile for a PPP connection
Unless you are setting up the DSLPipe-2S (which has two WAN ports), you can only
create one connection profile for a PPP connection.
To create a connection profile for PPP, you must, at a minimum, do the following:
1
Assign values to the following in the Configure menu:
My Name =
My Addr =
Rem Name =
Rem Addr =
Route =
Bridge =
Send Auth =
Send PW =
Recv Auth =
Recv PW =
2
Choose Configure > Ethernet > Connections. Set Encaps = PPP.
3
Choose Ethernet > Frame Relay > connection. Set Active = No.
