DSLPipe/CellPipe Quick Setup
3-1
3
Configuring the unit
Many of the DSLPipe and CellPipe units share a similar user interface. The main
configuration window is described in “The DSLPipe/CellPipe main window” on
page 2-3. The DSL-HSTB and the DSL-Cell-20A units, however, use a
command-line interface for displaying status and changing configuration. For more
details on using this interface, see the sections on “Configuring the DSL-Cell-20A”
on page 3-8 and “Configuring the DSL-HSTB unit” on page 3-13.
All DSLPipe units ship with a default Frame Relay configuration. See “Configuring
the DSLPipe units” on page 3-2 for details. If you do not need to change the default
configuration, just plug in the cables and your DSLPipe unit is ready for use. If you
need to change the configuration, see “Changing default configuration of DSLPipe
units” on page 3-3. Since the DSL-HSTB unit uses a command-line interface instead
of menus, the procedure for changing the default configuration of this unit is not the
same as the procedure for changing the default configuration of the other units. See
“Configuring the DSL-HSTB unit” on page 3-13.
The DSL-Cell-50S and the DSL-Cell-50A units do not ship with a default
configuration. See “Configuring the DSL-Cell-50A and the DSL-Cell-50S units” on
page 3-6 for details.
