LSIS XGL-C22A Скачать руководство пользователя страница 78

Страница: 78 / 299

Chapter 6 Communication Parameter

6-26

6.5.2 Menu bar and shortcut of XG5000

The following is menu bar and short cut of XG5000.

Menu bar

Icon

Description

Project

New Project

Create a new project.

Open Project

Open the existing project.

Open from PLC

Upload the project and program stored in PLC.

Open KGLWIN File

Open the project file for KGLWIN.

Open GMWIN File

Open the project file for GMWIN.

Save Project

Save the project.

Save As

- Save the project as a different name.

Close Project

Close the project.

Save As Binary

Saved as the binary file that cannot show the details of the
project.

Write Binary to PLC

Write the binary file with the PLC. You cannot see the
details of the project.

Add Item

Add Item to Project

Import from File

Import the item from the file to the project

Export to File

Save the selected items included opened project as
separated file.

Save Variable Names to File

Save variable names to file for using other programs.

Save EtherNet/IP Tags to file

Compare Project

Compare two projects stored in PC and displays its result.

Print the active window’s details.

Preview

- Previously display the screen to be printed.

Print Project

- Select the project item to print

Print Setup

- Set the printer options.

Edit

Undo

Cancel the edit on Program Edit Window to recover its
previous status.

Redo

Recover the edit cancelled above.

Cut

Copy the selected block to clipboard and delete the block.

Copy

Copy the selected block to the clipboard.

Paste

Copy from the clipboard onto Edit Window.

Delete

Delete the selected block or items.

Online

Connect

Connect with PLC

Connection Setting

Specify the connection method.

Change Mode

Change the mode of connected PLC

Read

Read parameter/program/comment from PLC.

Write

Write parameter/program/comment on PLC.

Compare with PLC

Compare the project with project saved in PLC

Set Flash Memory

- Shows the window for setting up the flash memory.

Control Redundancy

Control the redundancy PLC.

Communication module setting

Set about communication module

Содержание XGL-C22A












































































































































































































































































































Результаты поиска

Содержание XGL-C22A

Отзывы:

LSIS XGL-C22A, Руководство пользователя, Страница: 78 / 299

Результаты поиска

Содержание XGL-C22A

Отзывы: