LSIS XGL-C22A, Руководство пользователя, Страница: 217 / 299

Chapter 10 Program Examples
10-11
After standard settings, P2P channel and P2P block should be set. Setting methods are as follows.
Sequence Procedure Setting method
1 P2P setting
Click ‘ ’ below th project windows
1
Communication
module settings
1. Right click on the Network -> Add Item -> Communication module
2. Click “Add Module” and select Type, Base, Slot. Then click “OK”.
3
P2P channel
setting
1. Double-click of P2P 01 and set P2P driver of channel 1 as
4
1. Double-click of P2P 01.
5
Setting of
writing
operation
1. Ch.: Select ch.1 set as XGT client set in P2P channel.
2. P2P function: select WRITE.
3. Conditional flag: to send frame every 200ms, use flag F92.
4. Command type, Data type: to write 1 word, select single and 2 byte.
5. No. of variable: since no. of word is 1, select 1.
6. Destination station number: select station number of server.
7. Setting: after setting Read area and Save area, click OK.
1) Read area: device address of data saved in the client
2) Save area: device address of server to save data
* If all settings are completed, color of index of channel becomes black.