Enter the following command to add the secondary library:
addlible lib(qsys2924)
For details on the steps used to ensure that the secondary language can
be used, see the iSeries National Language Support book (SC41-5101).
2.
Shut down the Domino server if it is active.
For details on stopping a Domino server, see Installing and Managing
Domino for iSeries, or the Domino for iSeries Help database (i400help.nsf).
3.
Enter on any iSeries command line:
adddomdoc
4.
Press F4 (Prompt).
5.
Type the server name in the resulting display, and press ENTER.
Tip
If you are not sure of the server name, press F4 to see a list of
server names.
ADDDOMDOC will detect the older version of Document Manager
(Domino.Doc) on your server and will fill in the install type and the
Document Manager subdirectory for you.
6.
Press ENTER.
7.
Start the Domino server on the upgrade machine.
8.
Make sure that design elements set in the design properties of your
Document Manager databases do not have the “Prohibit design replace
or refresh to modify” option selected.
Warning
This option must be turned off (unchecked) for all design
elements before you continue.
9.
Perform a design refresh by typing from the server console:
load design
Note
This process could take several hours depending on the number
of libraries and file cabinets you have installed.
10.
Upgrade any additional replica servers.
11.
Perform the post-upgrade tasks.
Chapter 4: Installing Document Manager on iSeries 400 59
