PyroTec™ PRO Hardw are User’s Manual, V1.2
108
RT-MN024-1.2 02/21
•
Unplug the power cord from the power supply at the rear of the instrument.
RS232 interface on Optib o PCB
•
Disconnect the instrument from the PC.
•
If desired, unplug the interface cable from the USB port on the Te-CU board behind
the left access door.
Alternatively, Disconnect the RS-232 interface cable from the Te-CU board.
•
Clean and, if necessary, decontaminate the entire instrument.
11.1.2 Reporting
•
Fill out a copy of the decontamination form and place it with the instrument.
•
Record the shut down in your “Maintenance and Service Logbook”
11.2 Transport
WARNING
Lifting or moving the instrument can cause serious injuries.
•
Injuries to the back due to overload can occur
•
Injuries can be caused due to a failing instrument
A
B
A
RS232 interface connector
B
USB connector
