PyroTec™ PRO Hardw are User’s Manual, V1.2
84
RT-MN024-1.2 02/21
Example and
Explanation
Example for a maintenance table, followed by explanations:
Example (e.g. daily maintenance)
Instrument/
Component
Maintenance Task
Reference
Part A
Clean thoroughly
Water with weak detergent
Part B
Check adjustment of compo-
nent C
Refer to section X.X.X,
Y-Z
Instrument/Component
•
Specifies the instrument or one of its individual components on which a maintenance
task must be performed.
Maintenance Task
•
States briefly what maintenance must be performed on the instrument/component
mentioned before.
Reference
•
Gives additional information, e.g. on means, tools, etc. that are necessary to perform
the maintenance task mentioned before.
•
Contains references to the sections in this manual or to other documents where the
corresponding instructions can be found.
General
Guideline
Note
: The daily and weekly maintenance schedule described here is a general guideline.
The schedule and the cleaning agents may have to be adapted to your special laboratory
conditions and depending on your application.
Note
: It is necessary to tighten the DiTi cone for Air LiHa (this is only necessary for the LiHa
(with system liquid). The adapter hardware is quite fixed on the Air LiHa and there is no
room to tighten it further. The seals and or the DiTi adapters are replaced in the preventa-
tive maintenance or if they become defective.
9.2.1 Maintenance: Immediate Maintenance
If the instrument is leaking, switch it off immediately and eliminate the source of leakage.
Refer also to section “Checking for Leaks”.
