LONINO LABORGHINI KS 6024, Перевод оригинальной инструкции по эксплуатации

Страница: 59 / 108

GB | Operating Instructions
2
Technical Data
The devices are manufactured in accordance with the provisions of EN 60745-1 and EN 60745-2-13 and fully comply
with the provisions of the German Equipment and Product Safety Act.
Electric Chainsaw KS 6024
Rated Voltage V~ 230
Nominal Frequency Hz 50
Fuse (time lag) A 16
No-load Speed n
0
min -1 7000
Rated Output W 2400
Bar 160SDEA041 Oregon
Guide Bar mm / “ 400 / 16
Cutting length mm 380
Chain 91PX057X
Speed m/s 12
Weight kg 4,8
Oil ml 200
Measured acoustic capacity level dB(A) 103,6
K=1,5
Sound Pressure Level
L
pA
(EN 60745-2-13)
dB(A) 92,2
K=1,5
Vibration
(EN 60745-2-13)
m/s 2 5,8
K=1,5
Class of Protection: II/DIN EN 60745/VDE 0740
Emissions
- The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
- The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks
- Try to keep the stress due to vibration as low as possible. For example, measures to reduce vibration stress are
wearing gloves when using the tool and limiting the work time. All phase of the operating cycle must be considered
in this regard, (for example, times when the power tool is switched off, and times when the power tool is switched
on but is not running under load).
1 Wear eye, head and ear protection!
2 Warning!
3 Read operation instructions before use
4 Do not subject this electric power tool to rain
5 Remove plug immediately if the power flex is
damaged or cut.
6 Attention, kick-back!
7 Hold tool with both hands!
8 Attention: Environmental Protection! This device
may not be disposed of with general/ household
waste. Dispose of only at a designated collection
point.
9 Granted acoustic capacity level L
WA
112 dB(A)
10 Protection class II / double insulated
11 Confirms the conformity of the power tool with the
directives of the European Community.
Illustration and explanation of pictograms
9 10 11
1 2 3 4 5 6 7 8