9.3.2 User address code setting
Enter:20 XXXX
(2)Operation password canceling
Operations: (PROG
user password
#)
20
XXXX
#
Operations: (PROG
user password
#)
22
X
#
Parameter definition:
XXXX = 4 digits user address code. The factory default
setting is 1234.
Functions:
After setting user address code, when alarm occurs, the center
Parameter definitions:
X=1~5(NO.X operation password)
Functions:
Password canceling.
stations will determine which control panel is calling. Do not set same user
address code in one center stations.
9.3.5 Ringing attempts adjustment
Enter:23X
Operations: (PROG
user password
#)
23
X
#
9.3.3 User password modification
Enter:21 XXXX
Parameters setting:
X means ringing attempts. X=1- 9 times (X=0
Operations: (PROG
user password
#)
21
XXXX
#
indicating no telephone remote control and no automatically receiving the
telephone) X = 6 is the factory default setting.
Parameters definition:
XXXX is 4 digits new user password. The factory
default setting is 1234. User password must be different from the operation
password otherwise LCD displays 'Please select other Password!' and
buzzer chirps five times to indicate the failed operation .User can clean
operation password first then set user password to avoid the above
limitations.
Functions:
Modify user password which ensure the absolute authority to the
system operation. User must hold password to operate the system. After
Functions:
When user in other place dials phone connected to the control
panel, the system will receive the telephone automatically. User can input
password to arm or disarm.
Note:
If telephone and the control panel use the same telephone line, set
ringing attempts as many as possible to avoid clashing. After setting ringing
attempts, the system begins to accept user remote operation.
setting password, user should ensure its safety and reliability.
Restore password in factory default setting:
Hardware restores factory
9.3.6 Bell ON/OFF setting
Enter: 24 X
default setting. There is a jumper 'CB400' (Refer to figure 3) in control panel
Operations: (PROG
user password
#)
24
X
#
.Normally the jumper is in 'USE' mode, if user forgets password, he/she
should turn off system power, turn jumper to 'DEFAULT' mode, then restart
the system to restore user password in factory default setting. After the
system is initialized successfully, user should turn jumper to 'USE' mode, or
the system will restore password in factory default setting when initialized
next time.
Parameters definition:
X=1 (ON)
X=0 (OFF)
The factory default setting is X=1 (ON).
Functions:
User can choose bell alarm or not. Setting the bell, it will be on
when the system alarms; otherwise only buzzer and horn alarm.
9.3.4 Operation password setting/canceling
Enter:22 X YYYY
(1) Operation password setting
9.3.7 Auto-arm/disarm option
Enter: 25 X
Operations: (PROG
user password
#)
22
X YYYY
#
Operations: (PROG
user password
#)
25
X
#
Parameter definitions:
X=1~5 (NO.X new operation password) YYYY is 4
digits new operation password which is null in factory default setting. The
new operation password must be different from the user password and
duress password otherwise LCD displays 'Please select other Password!'
buzzer chirps five times to indicate the failed operation.
Functions:
User can modify five operation passwords which used to
arm/disarm the system or make the control panel flip arm-away and arm-stay
status but program the system.
-16-
Parameters definition:
X=1: valid (arm/disarm allowed).
X=0: invalid (arm/disarm not allowed)
T h e f a c t o r y d ef au lt s e t t i n g i s X = 0 ( a r m / d i s a r m
no t allowed)
Functions:
The system can be set auto-arm or auto-disarm in certain
moment as required. After setting these function, auto-arm/ auto-disarm time
can be set. Refer to 9.3.17 and 9.3.18 for detail information.
-17-
