Alarm
type
Center
stations
Phone
Alarm
Alarm
indicator
Keypad
buzzer
Bell
Fire zone
Yes
Yes
On
Chirp (time adjustable) Chirp (time adjustable)
Gas zone
Yes
Yes
On
Chirp (time adjustable) Chirp (time adjustable)
Panic zone
Yes
Yes
On
Chirp (time adjustable) Chirp (time adjustable)
Perimeter
zone
Yes
Yes
On
Chirp (time adjustable) Chirp (time adjustable)
Active zone
Yes
Yes
On
Chirp (time adjustable) Chirp (time adjustable)
Entry/Exit
zone
Yes
Yes
On
Chirp (time adjustable) Chirp (time adjustable)
Duress
zone
Yes
Yes
/
Mute
Mute
Anti-tamper
zone
Yes
Yes
On
Chirp (time adjustable) Chirp (time adjustable)
Telephone
line trouble
No
No
/
Chirp for 1 minute
Mute
AC power
failure
Yes
No
Flash
Chirp for 1 minute
Mute
Low-battery
Yes
No
Flash
Chirp for 1 minute
Mute
XX=21~24 (4 wired zones)
XX=30(control panel with anti-tamper function)
Bypass for all wired zones in factory default setting. Wireless zones are still
valid.
Functions:
Close some zone temporarily, then the zone can be activated
freely without alarm.
1) Zone alarm
The zone will alarm if the 24- hour zone be triggered otherwise buzzer will
chirp to indicate user must disarm the system within enrty-delay. If the
zone with entry-delay be triggered, buzzer chirps, LCD displays:
Please disarm!
9.3.25 Zone reactivate
Enter: 66 XX
If disarm within the end of entry-delay time, there will be no zone alarm. If
the system is in zone alarm status and the zone be triggered again, the
Operations: (PROG
user password #)
66 XX #
system will prompt zone alarm only but entry-delay.
Parameters definition:
XX means reactive bypassed zone.
XX=01~16 (16 wireless zones)
Zone number
Real time
ZONE 17 Panic
Year-Month-Day Hour: Minute T
Zone type
Alarm for telephone
line trouble
XX=17('Panic' key on the keypad and remote
controller)
XX=21~24 (4wired zones)
XX=30(control panel with anti-tamper function)
Functions:
User can reactive bypassed zone.
When alarming LCD displays relevant alarm information, alarm indicator
on, buzzer chirps. If zones alarm at the same time, LCD circularly displays
the ala rm info rmati on per 2 seconds or press '6' key or '9' key to flip the alarm
zone information.
2) System trouble
The system trouble including low-battery, AC power failure and telephone
9.3.26 Voice recording
Enter: 700
line trouble. Under these conditions, buzzer chirps 1 minutes, the indicator
and LCD displays relevant alarm information. The power indicator shows
Operation: (PROG
user password # )
700 #
low-battery and AC power failure. The letter 'T' flashes on the lower right
While recording LCD displays:
corner of the LCD per second to indicate the telephone line trouble.
6.5 Alarm type
Recording...
04 sec
After recording LCD displays:
Input Command
User can check voice effect of recording by inputting command.
Function:
The control panel can record voice for 4 seconds. User can
record family address and other alarm voice. When alarming, the system
sends voice alarm information via telephone network.
-24-
-9-
