5.2.5 Relay output
9.3.30 All zones bypassed
Enter: 910
The maximal load capacity of relay terminal '
'
Operations: (PROG
user password
#)
910
#
Contact capacity 10VA
Functions:
The system can provide a command to bypass all zones.
Contact maximal voltage 100VDC
Contact maximal current 0.5A
9.3.31All zones reactive
Enter: 920
Relay output type can be set as required including alarm output,fire alarm
Operations: (PROG
user password
#)
920
#
output and armed output. Please refer to program the system
Functions:
The system reactive all bypassed zones.
5.3 Control panel Installation
9.3.32 All wireless zone detectors canceling
Enter: 930
The control panel should be mounted in a location which allows
convenient access to AC power, telephone line
Operations: (PROG
user password
#)
930
#
Control panel aerial can not be blocked by subject
Functions:
After the operations, all wireless detectors are canceled.
Please use standby battery to ensure the control panel can work
normally when AC power failure
9.3.33 All remote controllers canceling
Enter: 940
Fix the control panel to the wall by screws. Interval between screws in the
Operations: (PROG
user password #) 940
#
same row is 140mm and vertical intervals between screws in two rows are
80mm. Nail 4 screws in the wall and hang the control panel on the
Functions:
After the operations, all remote controllers are canceled.
screws(Refer to the figures below)
9.3.34 Zone type initialization
Enter: 950
2.5
4.0mm
Operations: (PROG
user password
#)
950
#
Functions:
After the operations, all zone types restore to default setting.
9.3.35 System default restoring
Enter: 960
Operations: (PROG
user password #) 960
#
Notice: while hanging the control panel:
refer to the figures (depth of screws in the wall)
Figure 7
Figure 8
-6-
Functions:
After the operations, all parameters restore to default in factory
default setting. User password, operation password, user address code,
telephone number and date can not be canceled by this operation.
-27-
