Linksys Smart Switch LGS3XX, Руководство пользователя

Страница: 56 / 110

52
Table of Contents
Linksys
•
Alternate—The interface provides an alternate path to the root
device from the root interface
•
Backup—The interface provides a backup path to the designated
port path toward the Spanning Tree leaves Backup ports occur
when two ports are connected in a loop by a point-to-point link
Backup ports also occur when a LAN has two or more established
connections to a shared segment
•
Disabled—The interface does not participate in the Spanning Tree
•
Boundary—The port on this instance is a boundary port It inherits
its state from instance 0 and can be viewed on the STP Interface
Settings page
•
Mode—Displays the current interface Spanning Tree mode
•
If the link partner is using MSTP or RSTP, the displayed port mode
is RSTP
•
If the link partner is using STP, the displayed port mode is STP
•
Type—Displays the MST type of the port
•
Boundary—A Boundary port attaches MST bridges to a LAN in
a remote region If the port is a boundary port, it also indicates
whether the device on the other side of the link is working in RSTP or
STP mode
•
Internal—The port is an internal port
•
Designated Bridge ID—Displays the ID number of the bridge that
connects the link or shared LAN to the root
•
Designated Port ID—Displays the Port ID number on the designated
bridge that connects the link or the shared LAN to the root
•
Designated Cost—Displays the cost of the port participating in the
STP topology Ports with a lower cost are less likely to be blocked if STP
detects loops
•
Remain Hops—Displays the hops remaining to the next destination
•
Forward Transitions—Displays the number of times the port has changed
from the Forwarding state to the Blocking state
STEP 4 Select an interface, and click Edit
STEP 5 Enter the parameters
STEP 6 Click Apply The Running Configuration file is updated