Linksys Smart Switch LGS3XX Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 110

background image

98

Table of Contents

Linksys

Table of Contents

Linksys

Chapter 15 Maintenance

This section describes how to view system information and configure various

options on the device

It covers the following topics:

•

Reboot

•

File Management

•

Diagnostics

Device Models

All models can be fully managed through the web-based switch
configuration utility GE is the naming convention used for Gigabit Ethernet
(10/100/1000) ports

In Layer 2 system mode, the device forwards packets as a VLAN-aware bridge

Reboot

Restore Factory Defaults

Some configuration changes, such as enabling jumbo frame support, require the
system to be rebooted before they take effect However, rebooting the device
deletes the Running Configuration, so it is critical that the Running Configuration
is saved to the Startup Configuration before the device is rebooted Clicking
Apply does not save the configuration to the Startup Configuration

You can back up the device configuration by using Maintenance > File
Management > Configuration File Copy or clicking Save at the top of the
window You can also upload the configuration from a remote device

System Modes

STEP 1 Click Maintenance > Reboot
STEP 2 Enter the following fields:

•

Restore to Factory Defaults—Select to reboot the device by using
the factory default configuration This process erases the Startup
Configuration file and the backup configuration file

STEP 3 Click Apply and Reboot The parameters are copied to the Running

Configuration file and the stack is rebooted

File Management

This section describes how system files are managed The following topics are
covered:

•

Overview

•

Firmware & Boot Code

•

Active Firmware Image

•

Configuration & Log

•

Configuration File Copy

Overview

System files are files that contain configuration information, firmware images
or boot code

Various actions can be performed with these files, such as: selecting
the firmware file from which the device boots, copying various types of
configuration files internally on the device, or copying files to or from an
external device, such as an external server

The possible methods of file transfer are as follows:

•

Internal copy

•

HTTP/HTTPS that uses the facilities that the browser provides

•

TFTF client, requiring a TFTP server

Configuration files on the device are defined by their type, and contain the
settings and parameter values for the device

When a configuration is referenced on the device, it is referenced by
its configuration file type (such as Startup Configuration or Running
Configuration), as opposed to a file name that can be modified by the user

Content can be copied from one configuration file type to another, but the
names of the file types cannot be changed by the user

Other files on the device include firmware, boot code, and log files, and are
referred to as operational files

«
...
100
101
102
103
104
...
»

Содержание Smart Switch LGS3XX















































































































Отзывы:

Нет отзывов

Похожие инструкции для Smart Switch LGS3XX

xStack Storage DSN-4000 Series

Бренд: D-Link Страницы: 5

DSL5068EN(1T1R)

Бренд: Aztech Страницы: 40

RabbitCore RCM4400W

Бренд: Rabbit Страницы: 126

ControlPoint 2000

Бренд: 4Home Страницы: 20

LonWorks Communication Module LN-01

Бренд: Delta Electronics Страницы: 1

Бренд: DIGIWEB Страницы: 16

Бренд: Chase Research Страницы: 114

Бренд: ZyXEL Communications Страницы: 8

Бренд: PairGain Страницы: 80

Бренд: Raven Страницы: 33

IntraSwitch 5324MT

Бренд: Asante Страницы: 2

Бренд: Linksys Страницы: 2

Бренд: IC Realtime Страницы: 8

StorageGRID Webscale SG5700 Series

Бренд: NetApp Страницы: 15

SWC-2100 (VoIP CPE)

Бренд: SEOWON INTECH Страницы: 46

Бренд: Crestron Страницы: 52

Бренд: D-Link Страницы: 127

Бренд: MikroTik Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды