![background image](http://html.mh-extra.com/html/linksys/linksys-spa9000/linksys-spa9000_administration-manual_1923831198.webp)
Linksys Voice System Administration Guide
196
Line 1/2/3/4 page
Voice tab > FXS 1/2 page
FXS Port Polarity Configuration section
Voice tab >
Line 1/2/3/4 page
You can use the
Line 1
-
Line 4
pages to configure the line interfaces on your SPA9000. The line
interface page includes the following sections:
•
”Line Enable section,” on page 196
•
”Network Settings section,” on page 196
•
”SIP Settings section,” on page 197
•
”Subscriber Information section,” on page 199
•
”Dial Plan section,” on page 199
•
”NAT Settings section,” on page 199
•
”Proxy and Registration section,” on page 200
Voice tab > Line page
Line Enable section
Voice tab > Line page
Network Settings section
Idle Polarity
Polarity before a call is connected:
Forward
or
Reverse
.
Default:
Forward
Caller Conn Polarity
Polarity after an outbound call is connected:
Forward
or
Reverse
.
Default:
Forward
Callee Conn Polarity
Polarity after an inbound call is connected:
Forward
or
Reverse
.
Default:
Forward
Line Enable
To enable this line for service, select yes. Otherwise, select no.
Default:
yes
SIP ToS/DiffServ Value
TOS/DiffServ field value in UDP IP packets carrying a SIP message.
Default:
0x68
SIP CoS Value [0-7]
CoS value for SIP messages.
Default:
3