Linksys Linksys SPA9000 Скачать руководство пользователя страница 185

Страница: 185 / 246

Linksys Voice System Administration Guide

183

Voice tab

Block CID Per Call Act Code

Blocks caller ID on the next outbound call.

Default:

*81

Block CID Per Call Deact
Code

Removes caller ID blocking on the next inbound call.

Default:

*82

Block ANC Act Code

Blocks all anonymous calls.

Default:

*77

Block ANC Deact Code

Removes blocking of all anonymous calls.

Default:

*87

DND Act Code

Enables the do not disturb feature.

Default:

*78

DND Deact Code

Disables the do not disturb feature.

Default:

*79

CID Act Code

Enables caller ID generation.

Default:

*65

CID Deact Code

Disables caller ID generation.

Default:

*85

CWCID Act Code

Enables call waiting, caller ID generation.

Default:

*25

CWCID Deact Code

Disables call waiting, caller ID generation.

Default:

*45

Dist Ring Act Code

Enables the distinctive ringing feature.

Default:

*26

Dist Ring Deact Code

Disables the distinctive ringing feature.

Default:

*46

Speed Dial Act Code

Assigns a speed dial number.

Default:

*74

Secure All Call Act Code

Makes all outbound calls secure.

Default:

*16

Secure No Call Act Code

Makes all outbound calls not secure.

Default:

*17

Secure One Call Act Code

Makes the next outbound call secure. (It is redundant if all outbound
calls are secure by default.)

Default:

*18

Secure One Call Deact Code

Makes the next outbound call not secure. (It is redundant if all outbound
calls are not secure by default.)

Default:

*19

Conference Act Code

If this code is specified, the user must enter it before dialing the third
party for a conference call. Enter the code for a conference call.

Attn-Xfer Act Code

If the code is specified, the user must enter it before dialing the third
party for a call transfer. Enter the code for a call transfer.

Modem Line Toggle Code

Toggles the line to a modem.

Default:

*99

. Modem pass-through mode can be triggered only by pre-

dialing this code.

Содержание Linksys SPA9000























































































































































































































































Результаты поиска

Содержание Linksys SPA9000

Отзывы:

Linksys Linksys SPA9000, Руководство администратора, Страница: 185 / 246

Результаты поиска

Содержание Linksys SPA9000

Отзывы: