![background image](http://html.mh-extra.com/html/linksys/linksys-spa9000/linksys-spa9000_administration-manual_1923831051.webp)
Linksys Voice System Administration Guide
49
Configuring Line Interfaces on the SPA9000
Configuring Phone Lines and Calling Routing Behavior
•
User ID:
Enter a user ID, such as 9000.
This entry must exactly match the user ID on the
SPA400
Setup > SPA9000 Interface
page,
User ID
field. For more information, see
”Configuring a SPA400 to Interoperate with the
SPA9000,” on page 85
.
•
Proxy:
Enter the IP address of the SPA400.
•
Register Expires:
60
This setting ensures that the SPA9000 and SPA400 are resynchronized every 60 seconds.
This setting ensures that any changes in settings are synchronized on both devices.
SPA9000 Voice > Line: Subscriber Information, Proxy and Registration
5. Also in the
Proxy and Registratio
n section, enter the following settings to ensure that calls
can be transferred and forwarded to the voice mail server:
•
Set
VMSP Bridge
to
all
(required if this line is being used for SPA400 voice mail service).
•
Set
XFER Bridge Mode
to
all
.
•
Set
CFWD Bridge Mode
to
all
.
NOTES:
•
SIP Port:
You can keep the default value. Each line must have a unique SIP port (5060 for
Line 1, 5061 for Line 2, 5062 for Line 3, 5064 for Line 4).
•
Contact List:
The default value is
aa
, for the Auto Attendant. As a general practice, you
should leave the default value until after you confirm that the line is registered in the
Voice > Info
page,
Line Status
section,
Registration State
field. Then you can configure the