![background image](http://html.mh-extra.com/html/linksys/linksys-spa9000/linksys-spa9000_administration-manual_1923831094.webp)
Linksys Voice System Administration Guide
92
Configuring a SPA400 for Voice Mail Service
Administering the SPA400 and Voice Mail Service
5. To assign a voice mail box to the primary extension, complete the following steps:
a. Click the
Ext 1
tab.
b. Scroll down to
Call Feature Settings
.
c. Enter the
Mailbox ID
in the following format:
<lineN><mailbox>
Example:
2105
–
lineN: The SPA9000 line (1, 2, 3, or 4) that is configured with the voice mail settings
In the example, 2 is the number of the SPA9000 line interface that is configured for
the SPA400 voice mail server.
–
mailbox: The voice mailbox number for this station, as configured on the SPA400
Voice Mail Users
page.
In the example, voice mailbox 105 is assigned to the station.
NOTE:
The mailbox value corresponds to a User ID on the SPA400 voice mail server.
6. Click
Submit All Changes
. The phone reboots.
7. Close the browser window for this station.
8. Return to the browser window that shows the list of stations, and then repeat this
procedure for each station that you need to configure.
NOTE:
When you finish configuring stations, you can click the
Back
button on the browser
toolbar to return to the main web configuration page.
9. To verify your progress, perform the following tasks:
•
Station Name:
Verify that the station name appears on the phone display and in the list
of stations on the PBX Status page.
•
Mailbox Status:
Connect to the SPA9000 administration web server, and choose Admin
access with Advanced settings. Click
Voice tab > Line 2
. In the
Proxy and Registration
section, check the
Mailbox Status
field. You should see a listing for each extension that
you configured with voice mail. Refer to the following example.
Phone Configuration > Ext N
SPA400 > Setup > Voicemail Users