Linksys Voice System Administration Guide
52
Configuring Dial Plans
Configuring Phone Lines and Calling Routing Behavior
Setting the Call Capacity Parameter
You can set the maximum total number of incoming and outgoing calls on each line interface.
The default value is unlimited. You can set a value from 1 to 15, or leave the setting as unlimited.
NOTE:
The SPA9000 does not distinguish between incoming and outgoing calls for call
capacity.
1. Connect to the SPA9000 administration web server, and choose Admin access with
Advanced settings. (See
”Connecting to the SPA9000 Administration Web Server,” on
page 24
.)
2. Click
Voice tab > Line
N
, where
N
represents the line interface number.
3. Scroll down to the
Subscriber Information
section.
4. From the
Call Capacity
drop-down list, choose the maximum number of calls to allow.
SPA9000 Voice > Line: Subscriber Information
5. Click
Submit All Changes
.
Configuring Dial Plans
Dial plans determine how the digits are interpreted and transmitted. They also determine
whether the dialed number is accepted or rejected. You can use a dial plan to facilitate dialing
or to block certain types of calls such as long distance or international.
This section includes information that you need to understand dial plans, as well as procedures
for configuring your own dial plans. This section includes the following topics:
•
”How the Dialed Digits are Processed,” on page 53
•
”Digit Sequences,” on page 53
•
”Digit Sequence Examples,” on page 55
•
”Acceptance and Transmission the Dialed Digits,” on page 56
•
”Editing the System Dial Plan,” on page 57
•
”Entering a Phone Dial Plan,” on page 58
•
”Setting the Timers for the Dial Plan,” on page 59
