![background image](http://html.mh-extra.com/html/linksys/linksys-spa9000/linksys-spa9000_administration-manual_1923831189.webp)
Linksys Voice System Administration Guide
187
Voice tab
Voice tab > Regional page
Miscellaneous section
Set Local Date (mm/dd)
Sets the local date (mm stands for months and dd stands for days). The
year is optional and uses two or four digits.
Default: blank
Set Local Time (HH/mm)
Sets the local time (hh stands for hours and mm stands for minutes).
Seconds are optional.
Default: blank
Time Zone
Selects the number of hours to add to GMT to generate the local time
for caller ID generation. Choices are GMT-12:00, GMT-11:00,…, GMT,
GMT+01:00, GMT+02:00, …, GMT+13:00.
Default:
GMT-08:00
FXS Port Impedance
Sets the electrical impedance of the FXS port. Choices are
600
,
900
,
600+2.16uF
,
900+2.16uF
,
270+750||150nF
,
220+850||120nF
,
220+820||115nF
, or
200+600||100nF
.
Default:
600
Daylight Saving Time Rule
Enter the rule for calculating daylight saving time; it should include the
start, end, and save values. This rule is comprised of three fields. Each
field is separated by ; (a semicolon) as shown below. Optional values
inside [ ] (the brackets) are assumed to be 0 if they are not specified.
Midnight is represented by 0:0:0 of the given date.
SYNTAX:
start = <start-time>; end=<end-time>; save = <save-time>
The <start-time> and <end-time> values specify the start and end dates
and times of daylight saving time. Each value is in this format: <month>
/<day> / <weekday>[/HH:[mm[:ss]]]
The <save-time> value is the number of hours, minutes, and/or seconds
to add to the current time during daylight saving time. The <save-time>
value can be preceded by a negative (-) sign if subtraction is desired
instead of addition. The <save-time> value is in this format: [/[+|-
]HH:[mm[:ss]]]
The <month> value equals any value in the range 1-12 (January-
December).
The <day> value equals [+|-] any value in the range 1-31.
If <day> is 1, it means the <weekday> on or before the end of the
month (in other words the last occurrence of < weekday> in that
month).
The <weekday> value equals any value in the range 1-7 (Monday-
Sunday). It can also equal 0. If the <weekday> value is 0, this means that
the date to start or end daylight saving is exactly the date given. In that
case, the <day> value must not be negative. If the <weekday> value is
not 0 and the <day> value is positive, then daylight saving starts or ends
on the <weekday> value on or after the date given. If the <weekday>
value is not 0 and the <day> value is negative, then daylight saving
starts or ends on the <weekday> value on or before the date given.
The abbreviation HH stands for hours (0-23).
The abbreviation mm stands for minutes (0-59).
The abbreviation ss stands for seconds (0-59).
The default Daylight Saving Time Rule is
start=4/1/7;end=10/-1/
7;save=1
.