Linksys Voice System Administration Guide
169
Voice tab
Call Routing Rule
Special dial plan that determines which line interfaces can be used for
an external outbound call request from client station based solely on
the target public number. The dial plan is in the (
rule
|
rule
|…|
rule
)
format where:
rule
= <:L
n
[,
n
[,
n
[,
n
]]]>
pattern
n
= 1, 2, 3, or 4,
pattern
= any digit pattern (see <Dial Plan> on how to choose a digit
pattern).
If the target number matches the pattern of a rule, the Line indices in
the rule’s prefix are the line interfaces that can be used to make that call.
Matches are performed from left to right, so make sure the most specific
rules are placed first. For example:
Default:
(<:L1,2,3,4>9xx.)
The default call routing rule specifies that any of the four line interfaces
can be used for any target number starting with 9 followed by at least 2
more numbers.
Call Park MOH Server
The MOH Server to be used to handle a parked call. For example:
[email protected]:5082.
If this parameter is not specified, the internal parking lot is used to host
the parked call, in which case the parked caller hears the internal music
file.
Default:
imusic
Call Park DLG Refresh Intvl
The interval in seconds between refreshing a call park session.
Default:
0
(disables session refreshes)
Default Group Line
Same as <Group 1/2/3/4 Line>, but applies to the default group.
Default:
1,2,3,4
Group 1/2/3/4
User ID
Comma-separated list of User ID patterns. A client station whose User ID
matches any of the give patterns is considered to belong to that group.
If the User ID matches more than one group, the smallest group number
is assumed. If the User ID does not match any group, the client station is
considered to belong to the default group (also known as Group 0).
Each User ID pattern allows * and ? wildcards as well as %xx escaped
characters.
Default: blank (includes all client stations)
Group 1/2/3/4 Line
Ordered comma-separated list of line interfaces. The SPA9000 attempts
to make external calls for group members in the order in which the lines
are listed.
Example:
1,3
When a group member places an outbound call, the SPA9000 attempts
to use Line 1 first. If Line 1 is not available, the SPA9000 attempts to use
Line 3.
By default, this field is blank, meaning that no line can be seized.
Hunt Groups
Defines one or more hunt groups that can be called directly by any
client station like a regular extension. The syntax is the same as
<Contact List>. Each defined group extension and name also appears in
the corporate directory. This parameter is parsed twice by the SPA9000
such that a group member of one group can also be the extension of
another group (that is, one level of recursion allowed).
Default: blank
