Subject to modifications
User Manual
Operating Instructions
2.2A-20003-B07
Page 22 of 26
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
Technical Data
Metering device
Metering device model SSV D
Lubricant output per outlet and per stroke, code A.... 0.08 cm³
Lubricant output per outlet and per stroke, code B.... 0.14 cm³
Lubricant output per outlet and per stroke, code C...... 0.2 cm³
Lubricant output per outlet and per stroke, code D...... 0.3 cm³
Lubricant output per outlet and per stroke, code E...... 0.4 cm³
Lubricant output per outlet and per stroke, code F ...... 0.6 cm³
Lubricant output per outlet and per stroke, code G ..... 0.8 cm³
Lubricant output per outlet and per stroke, code H...... 1.0 cm³
Lubricant output per outlet and per stroke, code I ....... 1.4 cm³
Lubricant output per outlet and per stroke, code J ...... 1.8 cm³
Max. operating pressure ............................................ 350 bar
Max. starting pressure ................................................. 20 bar
Max. differential pressure
between two outlets ................................................... 100 bar
Outlet connection for tube ................................ ø 4 and 6 mm
Inlet connection ............................................................. G 1/8
Outlet connection ..................................................... M 10 x 1
Operating temperature .............................. - 25 °C to + 70 °C
Push-in Type Tube Fittings
High-pressure range, p
max
......................................... 350 bar
Inlet tube fittings of the metering devices
Outlet fittings, main metering device
Low-pressure range, p
max
.......................................... 250 bar
Outlet fittings, secondary metering devices
Inlet fittings to the lubrication point
Lines
Main Line (NW 4.1 x 2.3 mm)
Min. bursting pressure
(in connection with hose clamp, screwed). ................. 600 bar
Min. bending radius ..................................................... 35 mm
Min. temperature ......................................................... - 40° C
Pressure plastic tube (ø 6 x 1.5 mm)
Min. bending radius ..................................................... 50 mm
Bursting pressure at 20° C ............................ approx. 210 bar
Min. temperature.......................................................... - 40° C
Tightening Torques
Metering Devices
Closure plug (piston) in metering device .......................18 Nm
Closure plug (outlets) in metering device ......................15 Nm
Inlet fitting in metering device
- screw type ...................................................................17 Nm
- push-in type ................................................................10 Nm
Outlet fitting in metering device
- screw type ...................................................................17 Nm
- push-in type .............................................................. 12 Nm
Compression nut onto outlet fitting, screw-type
- plastic tube................................................................. 10 Nm
- steel tube .....................................................................11 Nm
Control pin in metering device .......................................12 Nm
Piston detector in metering device ................................15 Nm
KN - switch on metering device .....................................18 Nm
Install metering device ..................................................10 Nm
Metering screw in metering device ................................. 8 Nm
Metering Screws
The following table shows all available metering screws with their respective metering quantities and lengths:
Part N°.
Stamp / Code
Metering quantity
Length of metering screw
Piece Piece/type
08 / A
0.08 cm³
46.7 mm
12
549-34254-1
↓
14 / B
0.14 cm³
45.9 mm
12
549-34254-2
↓
20 / C
0.20 cm³
44.7 mm
12
549-34254-3
↓
30 / D
0.30 cm³
42.7 mm
12
549-34254-4
↓
40 / E
0.40 cm³
407 mm
12
549-34254-5
↓
60 / F
0.60 cm³
36.7 mm
12
549-34254-6
↓
80 / G
0.80 cm³
32.7 mm
12
549-34254-7
↓
100 / H
1.00 cm³
28.7 mm
12
549-34254-8
↓
140 / I
1.40 cm³
20.8 mm
12
549-34254-9
↓
180 / J
1.80 cm³
12.8 mm
12
549-34255-1
↓
08-180 / A-J
0.08 cm³ - 1.80 cm³
12.8 mm – 46.7 mm
20
549-34255-2
per 2
Tab. 2
Set of metering screws
