LINCHR E-Series, Инструкция по эксплуатации и монтажу

Страница: 44 / 45

E-series AC Charger
Configuration manual V1.3 43
4.3 Current limiting
E-series charger supports charging current adjustment, adjustable from 6A to 32A,
you can refer to "3.2.2 WLAN Access Point --- 4- System Parameter Setting" after
installation.
●For single-phase charger, the current is the current between L and N.
●For a three-phase charger, the current is the current between L1 or L2 or L3
and N.
●After the current is set, for a case-B charger, the maximum actual current
depends on the rated cable current carrying capacity of the connection line.
(Differentiated by the PP resistance value in the plug)
4.4 Load balance
E series chargers can achieve load balance through OCPP. The server can control
the charger's current through OCPP's Charging Profile. During the charging
process, when the server changes the current of the charger, the PWM
communication of the charger will be changed at the same time.
In this way, the current of each charger can be adjusted according to the
requirements, so that the entire charging station can achieve load balance (the
current adjustment range is 6~32A).