background image

 

 

 

 

 

 

MP7403 12/6V 1.5A Maintenance Smart Charger 

Instruction and Information Manual 

 

 

 

In  order  to  ensure  correct  and  safe  usage  of  your  battery  charger,  you  should  read  these 
instructions carefully.  Please retain these instructions for future reference. 

 

SAFETY 

  Ensure that cables are regularly inspected and kept in good condition.  

  Never  use  the  battery  charger  if  the  mains  lead,  mains  plug,  output  lead  or  crocodile  clips  are 

damaged. 

  Never use the battery charger if it has been dropped or damaged in any way.  

  WARNING:  Battery  charging  produces  explosive  gases.    Prevent  flames  and  sparks.    Provide 

adequate ventilation during charging. 

  Keep the charging area completely clear of combustible materials. 

  For  indoor  use  only, 

do  not

  expose  to  rain  or  any  other  forms  of  liquid  or  moisture. 

The charger must not be used as a continuous DC power source or for any purposes other than those 
listed. 

  The  charger  is  designed  to  charge  Lead-Acid  &  AGM  batteries  only  and must  not  be  used  for  the 

charging of non-rechargeable batteries.

 

Never attempt to charge a frozen battery. 

  There are no user-serviceable parts in this product other than the fuse in the mains plug. Opening the 

case is dangerous and electrical repairs or replacement of the mains cable should only be carried out 
by the manufacturer, its service agent or a suitably qualified electrician / electrical technician in order 
to avoid a hazard. Resultant damage to the product will result in the loss of your guarantee. 

 
GENERAL SAFETY 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or 
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for their safety. Children must be 
supervised to ensure that they do not play with the appliance. Cleaning and user maintenance must not be 
undertaken by children without supervision.  

 
Gases: 

The charging process produces flammable and explosive gases - the area in which charging takes 

place should be kept well ventilated.  Only connect and disconnect the battery leads when the mains supply 
is disconnected.  Avoid flames or sparks! Do not smoke! 
 

Cables: 

Make sure mains lead is located so that it will not be stepped on, tripped over, or otherwise subjected 

to damage. An extension cord should not be used unless absolutely necessary. Improper use of an extension 
cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure it is in good 
electrical condition. 

Содержание MP7403







Отзывы: