LINCHR E-Series, Инструкция по эксплуатации и монтажу

Страница: 42 / 45

E-series AC Charger
Configuration manual V1.3 41
●Tap card area indicator light
Fig.4-3: tap card area
This is used to indicate the RFID card reader is currently available, for start/stop
charger or for writing card operation.
4.2 RFID and how to use
E-series charger supports tap RFID card to start and stop charging. When the
charger is connected to the vehicle, the tap card area four corners will light up,
indicating that the charger can use the RFID card to working.
Using the RFID card for charging, follow these steps:
(1) Pull the plug off the charger, then push the plug all the way into the vehicle inlet.
For the socket mode of the charger, first, connect the plug to the charger, then
connect to the vehicle.
⑵When the indicator of the card reader area is light on, hold the RFID card close to
the indicator area for seconds meanwhile try to stay as close to the area as possible.