LINCHR E-Series, Инструкция по эксплуатации и монтажу

Страница: 25 / 45

E-series AC Charger
Configuration manual V1.3 24
3 RFID Setting In the Wi-Fi configuration interface,
select "3-RFID Setting" to enter the RF
card parameter configuration group.
This setting group consists of "RFID
setting interface", "card number
reading interface" and "RFID parameter
report" interface.
4 System Parameter
Setting In the Wi-Fi configuration interface,
select "4- System Parameter Setting"
to enter the system parameter setting
group, which is used to set the type of
charger, applicable grid type, RFID card
type, connection methods, current limit
point, and product serial number.
5 System Time
Setting In the Wi-Fi configuration interface,
select "5- System Time Setting" to
enter the system time setting group.
This setting group will automatically
recognize and read the time of the
connected device and set it into the
charger.
6 Fault Record
Report
In the Wi-Fi configuration directory
interface, select "6-Fault Record
Report" to view the fault records of the
charger. The fault record group is used
to display the fault records of the
charger.
7 Charging Record
Report
In the Wi-Fi configuration directory
interface, select "7-Charging Record
Report" to view the charging record of
the charger. The charge record group
is used to display the historical charge
record of the charger.
8 System Parameter
Report This item is mainly used to view the
current configuration parameters of
the system.
9 Run Data Report View the current charger status.
10 System Upgrade For system firmware upgrade.