LINCHR E-Series, Инструкция по эксплуатации и монтажу

Страница: 26 / 45

E-series AC Charger
Configuration manual V1.3 25
●1- WI-FI Access-Point Setting
Fig.3-7: WI-FI Access-Point Setting interface
The charger will show the Wi-Fi hotspot SSID name in this space on this page. You
can select the hotspot name you want to access through the radio button, enter the
password and click the "Connect" button to connect. (The RSSI on the page
represents the strength of the Wi-Fi hotspot. The lower the value, the higher the Wi-
Fi strength. For example, in the screenshot above, the “-57dbm” space has the
strongest WI-FI intensity.)
When the configuration is completed, a confirmation interface will pop up. After
confirming that the connected SSID and password are correct, click "Confirm" to
configure successfully. When the charger is set to STA mode again, it will
automatically connect to the Wi-Fi hotspot that has been set.
WARNING!
By pressing the switch button of AP mode and STA mode, you can refresh the
SSID of Wi-Fi in the area