Life Fitness Integrity SL, Руководство по обслуживанию

Страница: 38 / 156

Install Hill Profile Board
1. Install four screws securing hill profile board to front cover using a Phillips screwdriver.
Item Description Qty
1 Front cover 1
2 Hill profile board 1
3 Screw 4
2.
Install ribbon cable by aligning carefully and inserting into Hill Profile flex connector, then press down / in on the
two tabs to latch ribbon cable into flex connector on Hill Profile board.
Item Description Qty
1 Ground terminal 1
2 Flex connector 1
3. Press ground wire onto ground terminal by hand.
Install Rear Cover
1. Install headphone jack cable and USB cable into rear cover.
Non-Treadmill console shown
Item Description Qty
1 Front cover 1
2 Main board 1
3 Headphone jack cable 1
4 USB connector cable 1
5 Rear cover 1
Page 36 of 153