Life Fitness Integrity SL, Руководство по обслуживанию

Страница: 43 / 156

Install LCD Board
1. Install eight screws securing LCD board to front cover using a Phillips screwdriver. If a console has spacers
between the front cover and the Message Center board, reuse the spacers when installing the new Message
Center board.
NOTE: Tighten screws in the following order.
2. Install one ribbon cable by aligning carefully and inserting into Message Center board’s flex connector, then press
in on the two tabs to latch ribbon cable into flex connector. Repeat for other connector.
Item Description Qty
1 Ground terminal 1
2 Left ribbon cable 1
3 Right ribbon cable 1
3. Press ground wire onto ground terminal by hand.
Install Rear Cover
1. Install headphone jack cable and USB cable into rear cover.
Non-Treadmill console shown
Item Description Qty
1 Front cover 1
2 Main board 1
3 Headphone jack cable 1
4 USB connector cable 1
5 Rear cover 1
Page 41 of 153