Quick start guide
Prior starting, observe the safety and operating instructions on page 6!!!
Follow the description
step by step
to mount the lamp and program the yoke!
For
cable connections
, please refer to section
cabling, page
Assembling position:
First, the yoke must move to build-in position. The yoke must hang in a rigg. Connect
power cable, but let it switched off. Push the
UP
button and switch
on
. This is the indicator
for the electronic, that a lamp will be mounted.
No DMX-signal is needed. At the moment
NO
lamp or moving device is necessary!
Press the
UP
button and
power up
the yoke.
Wait until “adjust” is indicated. Release the button.
The electronic moves the axes including focus (if used
and connected) to the build-in position.
Wait
until “ready” is shown.
The yoke is ready to mount the lamp.
Power off
the yoke or switch it off
Motoryoke YipMan1 V4.58 Rev 1.00 9
