P06 TILT-axis 0-degree position
With this function the
TILT-axis fine adjustment
of the 0-position can be made. Please
read first chapter
TILT-axis moving range, page 17
. This function can only be used for
fine
adjustment.
The TILT axis is
not symetrical
. It can not be determined which DMX value correspondes
to this position.
Wertebereich:
3000..4000 units (value of the absolute value device)
Empfohlener Wert:
ca. 3000 units, so that the payload coupler is vertical
Operation:
depress You are now on menu level. The last adjusted menu
point is displayed, e.g.:
Menu P01:
DMX address motoryoke
depress ... until Menu P06 is displayed.
depress The second line displays the currently adjusted value.
depress Adjust the desired value.
depress You are back on menu level.
depress The equipment is ready for operation.
Caution !!
Check the
entire moving
range of the lamp:
The lamp-manufacturer specify
minimum distances
to inflammable materials. Never fall
below the minimum distance in no position of the lamp!
Make sure that a mounted lamp will never shine
onto
the motoryoke
Make sure that no cable will be
broken
,
bended
,
stretched
or
damaged
anyhow by
reason of turning the motoryoke!
Motoryoke YipMan1 V4.58 Rev 1.00 23
Menü
Menü
Ok
Ok
