P15 Focus/rotation unit 100%-value adjustment
At this point the
position of the focus or rotation unit for 100% DMX-value
can be set.
This function is only available, when focus module is switched on. This can be done in
menu
P02, Focus module ON/OFF, page 21.
Caution!
The 100%-value must be greater than the 0%-value! (P15 greater than P14)
You have the possibility to set this value automatically. When depressing the menu button
again (see operation), the Focus unit moves to the mechanical stop and stops moving.
Now the focus unit should be moved 20 values from the stop by depressing the DOWN-
key. This is to avoid a crash during normal moving.
Caution!
Do
not
use the auto-adjustment function with the rotation!
Range of values:
10..4000 units (value of the absolute value device)
Operation:
depress You are now on menu level. The last adjusted menu
point is displayed, e.g.:
Menu P01:
DMX address motoryoke
depress ... until Menu P15 is displayed.
depress The second line displays the currently adjusted value.
depress Adjust the desired value, rotation is moving to this position
depress You are back on menu level.
depress The equipment is ready for operation.
28
Motoryoke YipMan1 V4.58 Rev 1.00
Menü
Menü
Ok
Ok
