P35 rotation-axis loading position
At this point, the rotation axis
loading position
can be adjusted.
It is the position for
mounting
or
dismounting
the load.
It is very important for mounting or dismounting have the motoryoke on the
right
position.
Otherwise it is
not
possible to assemble the load. Especially, when
no
DMX is available.
Normally it is the position when the load is in horizontal position. It is normally not the 0%
and 100% position of the rotation
Range of values:
0..4096 units (value of the absolute value device)
Recommended value:
Mean value of 0% and 100% position
Operation:
depress You are now on menu level. The last adjusted menu
point is displayed, e.g.:
Menu P01:
DMX address motoryoke
depress ... until Menu P35 is displayed.
depress The second line displays the currently adjusted value.
depress Adjust the desired value, rotation is moving to this position
Wait until rotation is
not moving
anymore.
Adjust the desired position
depress You are back on menu level.
depress The equipment is ready for operation.
34
Motoryoke YipMan1 V4.58 Rev 1.00
Menü
Menü
Ok
Ok
