Safety- and operating instructions
Danger to life!
Before opening the housing disconnect the device from the mains !!!
Do
not
try in any case to
touch
the electronic through openings, also with any objects.
This can cause an
electrical accident
that can lead to death!
Please note: The
switching
or rising/falling from one input voltage range to another
during operation can lead to damage of the device!
When using a
generator
, first start the generator and wait for stable mains supply
voltage! After that switch on the power supply
When using a generator, leave the device switched off until the mains voltage and
frequency of the generator is stable. Starting the generator with switched on device will
damage the device!!!
The motoryokes are tested by the german trade association (
Berufsgenossenschaft).
The
devices conform with BGV C 1 and
correspond
to the newest safety regulations.
Never exceed the maximal possible
load of the mounting point
. (Rigg etc.)
Make sure that the
maximum load
of the fastening spigot will not be exceeded.
Never exceed the
maximum load
of the motoryoke. It is written on the identification plate
and in the technical data section, page .
The Motoryoke
must only be operated in the
operating position
provided for this
purpose. Operating position is vertically hanging down, fastening spigot on the top.
Make sure that all fixtures of the yoke are
tightened
. Observe the torque of the screws or
nuts.
Fast the headlight and all accessories like color changer, dimmer shutter and barndoor
with
safety belts
.
The user is
responsible
for the correct use of safety parts!
Make sure that all parts which are mounted on the headlight or moving devic are right
tightened
.
Lever forces
must not have an effect on the Motoryoke. This means that the installed
motoryoke must not be
shifted
or
bended
! It is also forbidden when fastening spigot is
opened.
6
Motoryoke YipMan1 V4.58 Rev 1.00
