P12 TILT-down (negative) moving range
At this point the
TILT-down moving range
can be set. For the TILT-axis the moving
ranges (up and down) must be programmed individually. The negative moving range is
defined as the „direction bottom“ range. The moving ranges have the 0-position as
reference point. This point can be set in
P06, TILT-axis 0-position, page 23
.
Before programming this point read chapter TILT-axis moving range, page 17 and P06,
TILT-axis 0-position, page 23
!
Range of values:
10..180 degree
Recommended value:
90 degree
Operation:
depress You are now on menu level. The last adjusted menu
point is displayed, e.g.:
Menu P01:
DMX address motoryoke
depress ... until Menu P12 is displayed.
depress The second line displays the currently adjusted value.
depress Adjust the desired value.
depress You are back on menu level.
depress The equipment is ready for operation.
Caution
!!
Check the entire
moving range
of the lamp:
The lamp-manufacturer specify
minimum distances
to inflammable materials. Never fall
below the minimum distance in no position of the lamp!
Check that the
motoryoke
will not be lit when lamp is on top position.
Make sure that no cable will be
broken
,
bended
,
stretched
or
damaged
anyhow by
reason of turning the motoryoke!
Headlights generally must
not
be operated with the ignition electronic on the top. Observe
the specifications of the lamp manufacturer!
Motoryoke YipMan1 V4.58 Rev 1.00 25
Menü
Menü
Ok
Ok
