That applies also to the
transport
. It is absolutely forbidden to hang up the yoke on its
spigot when transported!
If you want to use a transport
carriage
, it must be certified by Licht-Technik!
The fastening spigot must be
checked visual
once a year. The spigot must be in right
angel to the housing. This must be checked in
front
and
side
view. A
protractor
can be a
help.
Furthermore, the
spigot
itself and the
surface
of the yoke must not be deformed. Make
sure that the spigot is not loose or unformal.
If the spigot is visibly
damaged
or deformed the motoryoke must not be used anymore.
The device has to be sent to Licht-Technik.
A safety device that was
once loaded
or is visibly damaged
must not
be used anymore.
When working on the motoryoke, it must be
switched off
or the power line must be
interrupted. Make sure that the Motoryoke cannot be moved by the control panel.
The operator must make sure that
no person
is in the swivelling range of the motoryoke.
Inform your coworker and colleagues that the motoryoke is behaving like a work robot.
When the position is changed at the control panel the device is trying to move on this
position. There is the danger of being bruised and get frightened.
Admissible ambient
temperature
: 0..45 degree Celsius.
The motoryoke must not be
lit
directly
by a mounted lamp. Limit the range of rotation
(TILT axle) so that the headlight
does not shine
on the motoryoke.
Check the whole swivelling range of the headlight. The manufacturers of the lamps specify
minimum permissible distances
to inflammable materials. Make sure that these
distances are attended in every position of the lamp.
The manufacturers of the lamps specify maximum
inclination
. HMI headlights are not
allowed to operate with the ignition electronic on the top.
Motoryoke YipMan1 V4.58 Rev 1.00 7
90 degree
