background image

5

206-4272

Table of Contents

Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . .  4
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

STB-3000 Introduction / Setup Checklist

. . . . . . . . . . . . . 6

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setup Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

STB-3000 Cabling Connections

  . . . . . . . . . . . . . . . . . .  9

Before You Begin  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connect the STB to the Display Panel . . . . . . . . . . . . . . . 7
STB-3000 Cabling Diagram  . . . . . . . . . . . . . . . . . . . . . . . 9

Commercial Mode Overview

. . . . . . . . . . . . . . . . . . . 10  12

Pass-through Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
FTG Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Determining the STB Operating Mode . . . . . . . . . . . . . .  12

Pro:Centric Operation

  . . . . . . . . . . . . . . . . . . . . . . . . 13  14

Pro:Centric Interactive Menu Features. . . . . . . . . . . . . . 13
Pro:Centric Interactive Menu Navigation  . . . . . . . . . . . . 13
Pro:Centric Setup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Setting the Video Output Resolution

. . . . . . . . . . . . . . . 15

EZ-Manager Wizard

  . . . . . . . . . . . . . . . . . . . . . . . . . . 16  25

Before You Begin  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Initiate Configuration or Exit the EZ-Manager Wizard  . .  17
STB Configuration Options  . . . . . . . . . . . . . . . . . . . . . . . . 18
Zones and Room Number Assignments  . . . . . . . . . . . . . 18
Configure Pro:Centric Settings . . . . . . . . . . . . . . . . . . . . 20
USB Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Ez Download Utility

  . . . . . . . . . . . . . . . . . . . . . . . . . . 26  29

Before You Begin  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Accessing and Using the Ez Download Utility  . . . . . . . .  26 

Installer Menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 – 39

Accessing the Installer Menu  . . . . . . . . . . . . . . . . . . . . . 30
Using the Installer Menu . . . . . . . . . . . . . . . . . . . . . . . . . 31
Exiting the Installer Menu and Activating Settings  . . . . . 31

Custom Master STB Setup

  . . . . . . . . . . . . . . . . . . .  40  42

Before You Begin  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Clonable STB Setup Menu Features  . . . . . . . . . . . . . . . 40
Custom Master STB Setup Procedure . . . . . . . . . . . . . . 41

Cloning Procedures

. . . . . . . . . . . . . . . . . . . . . . . . . . 43 – 48

Learning Configuration from a Master STB  . . . . . . . . . . 43
Teaching Configuration to a Target STB. . . . . . . . . . . . . 45

FTG File Manager Utilities Overview

. . . . . . . . . . . . . 49 – 54

Creating an FTG Configuration File  . . . . . . . . . . . . . . . . 49
FTG File Manager Main Screen . . . . . . . . . . . . . . . . . . . 51
FTG Channel Map Configuration Utility  . . . . . . . . . . . . . 52
FTG Channel Map Editor  . . . . . . . . . . . . . . . . . . . . . . . . 53
FTG Installer Menu Configuration Utility. . . . . . . . . . . . . 54

IP Environment Setup

  . . . . . . . . . . . . . . . . . . . . . . . . 55 – 62

Accessing the IP Environment Menu  . . . . . . . . . . . . . . . 55
Pro:Centric Setup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Network Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Pre-loaded Applications  . . . . . . . . . . . . . . . . . . . . . . . . . 62

References

Updating STB Software using a USB Memory  

Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  64
Display Panel Specifications  . . . . . . . . . . . . . . . . . . . . . . . 65
STB Aux Input Configuration  . . . . . . . . . . . . . . . . . . . . . . . 66
Auto Input(s) Sensing Feature . . . . . . . . . . . . . . . . . . . . . . 67
Restoring Factory Defaults on the STB(s) . . . . . . . . . . . . . 68
Using the STB’s Zoning Features  . . . . . . . . . . . . . . . . 69 – 72
Using Media Share Features . . . . . . . . . . . . . . . . . . . . 73 – 75
STB-3000 Jack Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

External IR Receiver Specifications

. . . . . . . . . . . . . . . . . . . 77 

External Audio Line Out Specifications

  . . . . . . . . . . . . . . . . 78 

Installer Remote Typical Key Functions. . . . . . . . . . . . . . . 79
STB Installer Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 – 83

General Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . 81
STB Quick Check  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Commercial Mode Check  . . . . . . . . . . . . . . . . . . . . . . . . 83

Glossary of Terms  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Document Revision History / Open Source Software Notice 85
Back Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Notes 

• 

Installer Menu content is intended for use primarily by qualified TV electronics technicians. 

• 

Refer to the STB-3000 Owner’s Manual for additional information on STB installation, specifications, maintenance, and safety instructions.

• 

Design and specifications subject to change without prior notice. This document provides examples of typical screen displays. Your displays 

may vary from those shown in this document. 

Содержание STB-3000























































































Отзывы: