LG STB-3000 страница 20 Скачать руководство пользователя

Страница: 20 / 86

206-4272

EZ-Manager Wizard (Cont.)

Configure Pro:Centric Settings

Once you select “NEXT

” from the STB Configuration Options screen, the Searching for Pro:Centric

Server screen is displayed.

Note:

Select the “BACK” button, where available, to check previous settings, as necessary.

SEARCHING FOR PRO:CENTRIC SERVER...

EXIT

It may take 2 min 51 second(s).

This step automatically searches for the Pro:Centric Server.
If there is no Pro:Centric server installed, you do not need to continue with this procedure.
Please select either EXIT or MANUAL PRO:CENTRIC.

Status: Tuning channel 30

STB is now searching the pre-defined channels for the data channel...

MANUAL PRO:CENTRIC

BACK

You have the following options:
•

You can allow the EZ-Manager Wizard to proceed with a series of automated steps to configure

the STB for Pro:Centric operation and then to look for the Pro:Centric application and maintenance

(E-Z Installation) files to download. In this case, the wizard uses a search algorithm to determine

the Data Channel and the Pro:Centric Application Mode to set in the STB.

Continue with the “Automated Pro:Centric Configuration” subsection below.

• If you already know the settings (i.e., Data Channel and Pro:Centric Application Mode) that need

to be configured in order for the STB to connect to the Pro:Centric server and/or if the Pro:Centric

server is not yet installed, you may expedite the setup process by entering this data manually.

Continue with the “Manual Pro:Centric Configuration” subsection on page 22.

Automated Pro:Centric Configuration

Note:

the server is not yet configured on the system, use the manual configuration option to

configure the Pro:Centric operation. See also note below.

Note:

If Pro:Centric data delivery will be over IP and there is a DNS server at the site, you can

create a DNS entry “procentric.local” for the Pro:Centric server that will enable automated

Pro:Centric IP configuration via the EZ-Manager. If there is no DNS entry for procentric.local, you

must use the manual configuration option to configure the Pro:Centric IP operation.

Once the Pro:Centric data channel is found (a Pro:Centric Server Was Found screen will be

displayed) and the Pro:Centric Application Mode is determined, the wizard will advance to the

Processing the Pro:Centric Configuration screen, which shows the progress of the data

downloads (see example on following page). Note that some steps may require a few minutes.

(Continued on next page)

Содержание STB-3000























































































Результаты поиска

Содержание STB-3000

Отзывы:

Похожие инструкции для STB-3000

Бренды по названию

Популярные бренды

LG STB-3000, Руководство по установке

Результаты поиска

Содержание STB-3000

Отзывы:

Похожие инструкции для STB-3000

Бренды по названию

Популярные бренды