LG STB-3000 Скачать руководство пользователя

Страница: 65 / 86

206-4272

Reference: Display Panel Specifications

This section describes the types of commercial display panels that may be used with the STB-3000.

LG Hospitality TV Panels

The STB-3000 may be used with LG Hospitality TVs (LP645H, LT670H, etc.) that support Multiple

Protocol Interface (MPI).
Use the MPI/MTI cable provided to connect the RJ-12 MPI/MTI TELEVISION CONTROL port on

the STB-3000 front jack panel to the MPI port on the rear jack panel of the display.

LG Commercial Monitors & Public Display TV Panels

The STB-3000 may be used with LG Commercial Monitors (M3203CCBA, M3204C, etc.) or Public

Display TVs (LD450C, LT560C, etc.) that support the TV-Link Monitor (TLM) interface.
Use the 3.5 mm-to-DB9 TLM cable provided to connect the 3.5 mm RS-232C TELEVISION

CONTROL jack on the STB-3000 rear jack panel to the RS-232 CONTROL connector on the rear

jack panel of the display. *

Note that when you use these model display panels, you must set Installer Menu item 113 PANEL

TYPE appropriately. For example, if you are using an LG Commercial Monitor or Public Display TV

that does not support an xb Input Select command, set Installer Menu item 113 to 2. If you are using

an LG Commercial Monitor or Public Display TV that does support an xb Input Select command, set

Installer Menu item 113 to 4 (default).

Note:

Installer Menu item 113 values 0, 1, and 3 are available to support legacy panel types.

Commercial Non-LG TV Panels

The STB-3000 may be used with commercial non-LG TVs that support SONIFI’s Multiple Television

Interface (MTI) protocol.
Use the MPI/MTI cable provided to connect the RJ-12 MPI/MTI TELEVISION CONTROL port on

the STB-3000 front jack panel to the MTI (typically labeled “DATA”) port on the rear jack panel of

the display.

Note that some MTI interface configuration may be required on non-LG TVs. Refer to the TV

manufacturer’s documentation to determine if any configuration is required.

On early STB-3000 models, the RS-232C TELEVISION CONTROL jack is labeled “DISPLAY CONTROL 1”

and the MPI/MTI TELEVISION CONTROL port is labeled “DISPLAY CONTROL 2.”

Содержание STB-3000























































































Результаты поиска

Содержание STB-3000

Отзывы:

Похожие инструкции для STB-3000

Бренды по названию

Популярные бренды

LG STB-3000, Руководство по установке

Результаты поиска

Содержание STB-3000

Отзывы:

Похожие инструкции для STB-3000

Бренды по названию

Популярные бренды