LG STB-3000 Скачать руководство пользователя страница 73

Страница: 73 / 86

206-4272

Reference: Using Media Share Features

When the appropriate Media Share options are enabled in the IP Environment / Media Share Menu (see

“Accessing the IP Environment Menu” and “Media Share Setup” on pages 55 and 61, as necessary), guests

have the ability to use one or more of the following Media Share features:
•

Smart Share: Allows guests to use the STB/display panel to access and view media files (photos, videos,

music, etc.) shared either by wired DLNA Certified devices (the devices must be connected to the same

LAN as the STB) or by wireless LG devices using LG’s Smart Share application with Wi-Fi Direct.

• Screen Share: Allows guests to select a Miracast or WiDi capable device, whose screen can be displayed

on the display panel screen.

• SoftAP: Allows guests to use the STB as a 2.4 GHz wireless access

point for up to five devices.

This section provides an overview of the Smart Share, Screen Share, and SoftAP functionality.

Note: Typically, only one Media Share feature may be used at a time. If one feature is

currently in use, you may have to turn it OFF in order to turn ON another. In some cases,

you will be prompted to confirm your action. Follow the display prompts as necessary.

Smart Share

The following steps describe how to access and use the Smart Share feature, either with wired DLNA

Certified devices on the same LAN as the STB or using wireless LG devices/Wi-Fi Direct.

If you intend

to connect to an LG device using Wi-Fi Direct, remember that you must also turn ON Wi-Fi Direct and

launch the Smart Share application on the LG device.
1. Turn ON the STB/display panel.
The next step depends on whether you need to turn ON Wi-Fi Direct (i.e., to connect to a wireless LG

device):
• If you do not need to turn ON Wi-Fi Direct, you can proceed directly to step 7.
• Otherwise, press

MENU

on the Installer Remote to display the STB menus (either the setup menus or

the Function Menu depending on whether the STB is or is not in Pass-through Mode). Then, continue

with step 2.

2. Use the Up/Down arrows to select/highlight the

General

menu icon, and then press

3. In the General Menu, use the Up/Down arrows to select

Wi-Fi Direct

, and then press

(Continued on next page)

Quick

Picture

Sound

General

Safety

Accessibility

WI-FI DIRECT

[TV]LG Smart TV

REFRESH LIST

Quick

Picture

Sound

General

Safety

Accessibility

GENERAL

Language

Room Info

Time & Date

Timers

SIMPLINK

Set ID

Wi-Fi Direct

TV Name

410KKTF1J505

Note:

The example at left

shows the General Menu when

the STB is in Pass-through

Mode. The Wi-Fi Direct screen

is the same whether the STB is

or is not in Pass-through Mode.

Содержание STB-3000























































































Результаты поиска

Содержание STB-3000

Отзывы:

Бренды по названию

Популярные бренды

LG STB-3000, Руководство по установке

Результаты поиска

Содержание STB-3000

Отзывы:

Бренды по названию

Популярные бренды