76
206-4272
ANTENNA/
CABLE IN
LAN
IN 2
IN 1
USB IN 2
USB IN 1
OUT
(ARC)
EXT MPI
CONTROL
MPI/MTI
TELEVISON
CONTROL
POWER
RS-232C
TELEVISON
CONTROL
IR IN
SERVICE
AV IN
AUDIO
LINE OUT
DIGITAL
AUDIO
Reference: STB-3000 Jack Panels
AV (AUDIO/VIDEO) IN
(3.5 mm jack) Connect composite audio/
video output from external device. Use A/V
adapter cable provided.
ANTENNA/CABLE IN
Connect to Antenna/CATV.
SERVICE
Restricted to service updates.
DIGITAL AUDIO (Optical Digital Audio Out)
Use for amps and home theater systems. Note:
When the STB is OFF, this port is not enabled.
LAN
Use for video IP and/or network connections.
POWER (DC IN)
Use 19V 2.1A
AC/DC
power adapter (provided).
AUDIO LINE OUT
(3.5 mm jack) Connect audio equipment to use fixed line
level analog audio output. See also Reference section,
“External Audio Line Out Specifications.”
HDMI OUT
Use HDMI cable (provided) to connect
to display panel HDMI input.
IR IN
(3.5 mm jack) Connection for external IR receiver
(optional). Use when IR pass-through is not
supported by the display panel. See also Reference
section, “External IR Receiver Specifications.”
RS-232C TELEVISION CONTROL
**
(3.5 mm jack) Use TLM cable provided to connect
to LG Public Display/Commercial Monitor display
panel’s RS-232 connector.
*
On early STB-3000 models, the EXT MPI CONTROL port is labeled “MPI.”
**
Only one Television/Display Control connection should be used depending on the type of display panel to be controlled.
Refer to “STB-3000 Cabling Connections” on pages 7 to 9, and/or see Reference section, “Display Panel Specifications,”
for information on determining the appropriate connection. Also, note that on early STB-3000 models, the RS-232C
TELEVISION CONTROL jack is labeled “DISPLAY CONTROL 1” and the MPI/MTI TELEVISION CONTROL port is
labeled “DISPLAY CONTROL 2.”
EXT MPI CONTROL
*
When the STB is in Pass-through Mode, the MPI
function enables an external MPI control device
(i.e., VOD/PPV STB, etc.) to control the STB.
HDMI IN
1 & 2
Connections for HDMI output
from external devices.
USB 2 & 1
Insert USB memory device for software updates,
cloning purposes, FTG Mode configuration, picture/
music entertainment, etc., as applicable.
MPI/MTI TELEVISION CONTROL
**
(RJ-12 port) Use MPI/MTI cable provided to
connect to LG Hospitality display panel’s MPI
port or commercial non-LG display panel’s
MTI (DATA) port.
STB-3000 LED
STB-3000 Front Panel
STB-3000 Rear Panel