LG-Nortel IP LDK-20, Руководство по программированию

Страница: 71 / 581

IP LDK-20 Programming Manual System Feature
55
2.3.3.3 Automatic Hold
Description
When a station is connected to a CO Call, the station user can make another intercom call just by
pressing DSS button. In this case, the previous CO Call is held automatically.
It is also able to applied to CO Call to CO Call. That is, when a station user makes another CO call by
pressing
{CO} button without disconnecting previous CO Call, the previous Call is holed by Auto Hold
ADMIN programming. The held CO line follows preferred hold type by ADMIN programming.
Operation
To use Automatic Hold while on a CO Line call,
1. Press a {CO} button.
2. When the new CO Line is connected, the previous CO Call is placed on preferred hold state.
Admin Programming
n
Automatic Hold 4.1.3.2 (PGM 112 – FLEX 2)
n
Hold Preference 4.4.1.8 (PGM 160 – FLEX 8)
2.3.3.4 Park
Description
A user can park a call in a virtual location. The user may make a page announcement for the desired
user to pick-up the parked call. The call retrieve the call by dialing the location number. If the station
neither have the
{CO} button nor {LOOP} button, the user cannot retrieve.
If the call remains unanswered for the Call Park Recall time, the original station which parking the call
receives recall. If the call is still unanswered, then the attendant will receive recall at this time. If
attendant doesn’t answer again in the Attendant Recall time, the CO Line call will be disconnected and
returned to idle.
Operation
To park a call,
1. Press the [TRANS/PGM] button.
2. Dial the parking location 601~608(Call Park Location Code (Ref.1))
3. Replace the handset or go on-hook
4. If desired, page to the desired user to retrieve the call.
To retrieve the parked call from a DKTU,
1. Lift the Handset or press the [MON] button.
2. Dial the parking location to retrieve the parked call.