IP LDK-20 Programming Manual System Feature
34
2.2.8 Memory dialing
2.2.8.1 ACNR (Auto Call Number Redial)
Description
If Call destination is busy or no answer, Redialing is operated repeatedly within ACNR retry counter.
The system will retry the number based on programming with appropriate pauses in between dialing.
(default: 3 times)
Operation
To use ACNR while receiving busy/no answer on a CO Line.
1. Press the
[REDIAL]
button.
2. Replace the handset or go on-hook.
3. The system will automatically retry the call at programmed intervals.
4. When the called party answers, lift handset or press
[MUTE]
button to make the call.
To cancel.
Press the flashing
[REDIAL]
button.
Or,
Lift handset or press
[MUTE]
button while a CO Line is
seized to make ACNR.
Condition
1. A DKTU which doesn't have
[REDIAL]
button, should be programmed with a
[REDIAL]
Flexible
Button to use ACNR.
[TRANS/PGM] + Flex. FLEX + [TRANS/PGM] + 9 7 + [HOLD/SAVE]
(2/8 Button only)
2. The analog CO Lines in the system should be equipped with Call Progress Tone detection Units
(CPTU)
3. When predefined CO Line is busy in ACNR mode, an available CO Line in the same group will be
seized.
Admin Programming
n
ACNR Pause Timer
4.5.1.10 (PGM 180 – FLEX 10)
n
ACNR Delay Timer
4.5.1.8 (PGM 180 – FLEX 8)
n
ACNR Tone Detect Timer
4.5.1.13 (PGM 180 – FLEX 13) – applicable to analog CO Line
only
n
ACNR No Answer Timer
4.5.1.9 (PGM 180 – FLEX 9)
n
ACNR Retry Counter
4.5.1.11 (PGM 180 – FLEX 11)
n
ACNR Tone Cadence
4.14.1 (PGM 423)
Содержание IP LDK-20
