IP LDK-20 Programming Manual System Feature
228
5. Enter the IP LDK IP address, path of the binary file and the password for upgrade. And press the
‘Next’ button.
6. In the ‘Next’ window, press ‘Start’ button. You can see the IP LDK MPB software upgrade process.
7. When the ROM file sending is finished in the PC, IP LDK will erase the previous ROM data and
start to fill IP LDK ROM area with the received ROM file.
Condition
1. When the line is released while upgrading process, just dial the phone number again. If the line
was properly disconnected, it will be connected immediately.
2. While upgrading process, other features do not work in the system.
3. When the IP LDK MPB software upgrade is finished without completing, you can retry to upgrade
by doing the whole process again.
4. If the ROM files you want to send are invalid, IP LDK MPB software upgrade will not be started.
5. DRAM should be installed on the MPB to use this feature.
Admin Programming
n
IP Setting for MPB
3.6.8 (PGM 108)
Содержание IP LDK-20
