LG-Nortel IP LDK-20 Скачать руководство пользователя страница 154

Страница: 154 / 581

IP LDK-20 Programming Manual System Feature

138

2.11.3.2 Two-way Recording via VMIB

Description

This feature allows a station to record a conversation on the mailbox by pressing a

{RECORD}

button

while the station is talking with CO party.

[Example]

The Figure 2.11.3.2 describes the operation of Two-way Recording.

Operation

To set a flexible button programmed for 2-way record feature,

1. Press the

[TRANS/PGM]

button.

2. Dial flexible button(to be assigned)
3. Press the

[TRANS/PGM]

button and dial ‘54’.

4. Press the

[HOLD/SAVE]

button

While a station user is the conversation with the CO line caller, the user press the

{RECORD}

button,

then the conversation will be recorded on user’s mailbox. The user presses the

{RECORD}

button

again or hangs up, then the recording will be canceled.

Condition

1. During the recording feature is enabled, the

{RECORD}

button will flash at 240 ipm and if it is

disabled, the

{RECORD}

button will be extinguished.

2. Not available to SLT.
3. Recording operation is canceled when station goes off-hook, press

{RECORD}

button again,

press

[FLASH]

button or CO party hangs up.

4. Not available to intercom call recording.
5. If the system has an external voice mail system, the conversation will be recorded to the external

voice mail system.

Admin Programming

Two Way Recording

4.1.3.10 (PGM 112 – FLEX 10)

IP LDK System

CO Incoming Call

Conversation

STA A

(Press Record button)

(Do not Record)

(Record)

STA B

Содержание IP LDK-20






































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IP LDK-20

Отзывы:

Похожие инструкции для IP LDK-20

Бренды по названию

Популярные бренды

LG-Nortel IP LDK-20, Руководство по программированию

Результаты поиска

Содержание IP LDK-20

Отзывы:

Похожие инструкции для IP LDK-20

Бренды по названию

Популярные бренды